TROUBLESHOOTING AND MAINTENANCE
Misfeed in C
1 Lower (1) in the illustration, open the fusing unit paper guide, and remove the misfed paper.
Be careful not to tear the misfed paper during removal.
3 Close the side cover.
The message " Clear paper path." will be cleared and copying will be possible.
(1)
Warning |
| Note | • | When closing the side cover, hold the |
|
The fusing unit is hot. Do not touch |
| handle. |
| |
|
|
| ||
the fusing unit when removing |
| • | If the paper was torn, make sure that no |
|
|
| torn pieces remain in the machine. | 2 | |
misfed paper. Doing so may cause a |
|
| ||
| • | If the message does not clear, check | ||
burn or injury. |
| |||
|
| again to make sure that no pieces of | ||
|
|
| ||
|
|
| paper remain. | |
|
|
|
|
|
2 If the misfed paper cannot be removed by the previous step, remove it from the paper output area.
Be careful not to tear the misfed paper during removal.
MISFEED IN TRAY 1
Note Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)
1 Pull out tray 1 and remove the misfed paper.
Be careful not to tear the misfed paper during removal.
2 Open and close the side cover.
The message " Clear paper path." will be cleared and copying will be possible.
• When closing the side cover, hold the
Note handle.
•If the message does not clear, check again to make sure that no pieces of paper remain.
3 Gently push tray 1 into the machine.
Push the tray in completely.
33