Using Other Functions/Services
81
Step by Step
Confirming/Deactivating an Alarm
If the service personnel have activated the alarm feature
on your telephone, you will receive an alarm call when
your HiPath1200 recognizes an ala rm situation
.To acknowledge the alarm call, you must answer it. If
you do not answer the alarm call, it will be repeated (de-
pending on how it is programmed).
Precondition: "Call: Sensor..." appears on the display
and your telephone rings three times in rapid successi-
on every four seconds.
Press the key.
or
nLift the handset
rEnter the code (only necessary if programmed by ser-
vice personnel; "Acknowledge Code" is active).
Press the key. The LED goes out.
or
tReplace the handset.

Turning off an Alarm

If an additional alarm was activated for the alarm call,
this can be specifically deactivated.
rmheh Enter the code.
oEnter the code ("password for manager access", consult
your service personnel).
The alarm is deactivated.
Speaker
Speaker