Sierra 240-VTP, 241-VTP instruction manual Using the Setup Menus, Programming the Flow Meter

Series 24-HP Instruction Manual Chapter 3 Operation

Using the Setup Menus

Programming the Flow Meter

1.Enter the Setup Menu by pressing the ENTER key until prompted for a password. (All outputs are disabled while using the Setup Menus.)

2.Use the ￿￿￿￿ keys to select the password characters (1234 is the factory-set password). When the password is correctly displayed, press ENTER to continue.

3.Use the Setup Menus described on the following pages to customize the multi- parameter features of your Innova-Mass Flow Meter. (The entire lower display line is available for entering parameters.)

4.To activate a parameter, press ENTER. Use the ￿￿￿￿ keys to make selections. Press ENTER to continue. Press EXIT to save or discard changes and return to Run Mode.

5.Program the UNITS menu first because later menus will be based on the units selected.

IM-24-HP 3-3