Series | Chapter 3 Operation |
|
|
Time & Date Menu
Run Mode
ENTER
|
|
| Password |
| |||
|
|
|
|
|
|
|
|
|
|
|
| ENTER |
| ||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| Time & Date |
|
| Use | ||
|
|
| Menu |
|
| keys to access menus | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set Time xx:xx:xx
Set Date xx/xx/xx
Use the Time and Date Menu to enter the correct time and date into the flow meter’s memory. The parameters are used in the Run Mode and the alarm and system log files.
Note: Time is displayed in AM/PM format, but military format is used to set the time. For example, 1:00 PM is entered as 13:00:00 in the Set Time menu.
Example for Setting the Time
How to set the time to 12:00:00. You can check the time in the Run Mode by pressing the keys until the Time & Date screen appears. Note: all outputs are disabled while using the Setup Menus.
1.Use keys to move to the Time and Date Menu.
2.Press key until Set Time appears. Press ENTER.
3.Press key until 1 appears. Press key to move the underline cursor to the next digit. Press the key until 2 appears. Continue sequence until all desired parameters are en- tered. Press ENTER to return to the Time and Date Menu.
4.Press EXIT to return to the Run Mode.
