Chapter 1 Introduction | Series |
|
|
Note and Safety Information
We use note, caution and warning statements throughout this book to draw your attention to important information.
Warning!
This statement appears with information that is important to protect people and equipment from damage. Pay very close attention to all warnings that apply to your application.
Caution!
This statement appears with information that is important for protecting your equipment and performance. Read and follow all cautions that apply to your application.
Note
This statement appears with a short message to alert you to an important detail.
Receipt of System Components
When receiving a Sierra mass flow meter, carefully check the outside packing carton for damage incurred in shipment. If the carton is dam- aged, notify the local carrier and submit a report to the factory or dis- tributor. Remove the packing slip and check that all ordered components are present. Make sure any spare parts or accessories are not discarded with the packing material. Do not return any equipment to the factory without first contacting Sierra Customer Service.
Technical Assistance
If you encounter a problem with your flow meter, review the configura- tion information for each step of the installation, operation and set up procedures. Verify that your settings and adjustments are consistent with factory recommendations. Refer to Chapter 4, Troubleshooting, for spe- cific information and recommendations.
If the problem persists after following the troubleshooting procedures outlined in Chapter 4, contact Sierra Instruments, Technical Support at
(888)
•the flow range, serial number and Sierra order number (all marked on the meter nameplate)
•the problem you are encountering and any corrective action taken
•application information (gas, pressure, temperature and pip- ing configuration)
