Using the ETA-26 Handycam

Station adaptor

You can use the Handycam Station, etc., by attaching the ETA-26 Handycam Station adaptor. (1) Match the screw on the adaptor with the

screw hole for a tripod on the camcorder, then tighten the screw. You can slide the plate including the screw to the left or right until the camcorder is in the desired position.

(2) Connect the connection plug of the adaptor to the 26-pin connector on the camcorder.

1

Uso del adaptador ETA-26

Handycam Station

La Handycam Station, etc., puede utilizarse ajustando el adaptador ETA-26 Handycam Station.

(1)Introduzca el tornillo del adaptador en el orificio de tornillo para trípode de la videocámara y luego apriete el tornillo. La placa que contiene el tornillo puede deslizarse a izquierda o derecha hasta que la videocámara se encuentre en la posición deseada.

(2)Conecte el enchufe de conexión del adaptador al conector de 26 pines de la videocámara.

2

Additional information / Información adicional

Notes on the ETA-26 Handycam Station adaptor

•While the adaptor is attached to the camcorder, you cannot install nor remove the cassette.

•While the adaptor is attached to the camcorder, you cannot mount the camcorder on a tripod.

Notas sobre el adaptador ETA-26 Handycam Station

•Mientras el adaptador está ajustado en la videocámara, no es posible instalar ni retirar el videocassette.

•Mientras el adaptador está ajustado en la videocámara, no es posible montar la videocámara en un trípode.

115

CCD-TRV101.3-856-814-21 (E,S)

Page 115
Image 115
Sony CCD-TRV101 115, Using the ETA-26 Handycam Station adaptor, Uso del adaptador ETA-26 Handycam Station