Picture
Symptom | Cause and/or corrective actions |
|
|
While editing using the DV connecting | • Remove the DV connecting cable, and connect it |
cable, recording picture cannot be | again. |
monitored. |
|
|
|
Others
Symptom | Cause and/or corrective actions |
The camcorder becomes warm. | • If the power of the cammcorder is on for a long time, |
| it becomes warm, which is not mulfunction. |
|
|
The supplied Remote Commander does | • COMMANDER is set to OFF in the menu system. |
not work. | m Set it to VTR4 or ID. (p. 86) |
| • Something is blocking the infrared rays. |
| m Remove the obstacle. |
| • The battery is not inserted with the correct polarity. |
| m Insert the battery with the correct polarity. (p. 86) |
| • The batteries are dead. |
| m Insert new ones. (p. 86) |
|
|
The CHARGE lamp flashes after you | • The camcorder is not malfunctioning. |
charge the battery pack installed in the |
|
camcorder. |
|
Additional information / ÑÓÔÓÎÌËÚÂθ̇fl
No function works though the power is on.
•Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the back of the cassette compatment lid using a
(p. 82)
ËÌÙÓ Ï‡ˆËfl
AC power adaptor
Symptom | Corrective actions |
|
|
The VTR/CAMERA or CHARGE lamp | • Disconnect the mains lead. After about 1 minute, |
does not light. | reconnect the mains lead. (p. 7) |
|
|
The CHARGE lamp flashes. | • See the chart on the next page. |
|
|
73
