APower LED
Alternates between green and amber lights when the unit is starting up. Lights green when startup is complete.
Lights amber when it is on standby.
BNetwork LED
Lights green when there is activity at the corresponding LAN connector at the rear of the NSR.
CHDD LED
Blinks green when the internal hard disks are accessed.
Lights amber when an error occurs with a hard disk.
DStatus LED (1 to 4)
Lights in sequence (1, 2, 3, 4) when the NSR starts.
When an error occurs, the corresponding status LED lights together with the error LED, which lights or blinks to indicate the type of error.
For details, see “STATUS LED” (page 168).
EError LED
Lights or blinks when an error occurs.
FREC LED
Lights when recording images.
GCombo drive
Use this drive to write data from the NSR hard disks to CD.
HLock
Use this in conjunction with the supplied front panel key to lock the front bezel. When the front bezel is locked, you cannot pull out the front bezel. Also, do not lock the front bezel when the front bezel is pulled out. You can distinguish the locked position from the unlocked position by looking at the lock, as illustrated below.
The front bezel is | The front bezel is |
locked | unlocked |
IVent holes
These openings allow air to flow from the front of the NSR to the rear.
Do not block the vent holes, allow dust to accumulate in the inner mesh of the vent holes, or obstruct the airflow in any way. Obstructing the airflow allows heat to build up inside the NSR and may result in fire or damage.
Chapter 1 Introduction | 10 |
|
|