Shutting Down and Restarting the NSR
Make sure that you shut down and restart the NSR from the “System” screen.
1 Click [System] at the top of the window.
The “System Menu” screen appears.
2 Click [Shutdown] or [Reboot].
A confirmation message appears, prompting you to confirm the operation.
3 Click [Shutdown] or [Reboot].
The NSR shuts down or restarts.
Note
Under normal conditions, the NSR shuts down or restarts after a few minutes. If the NSR does not shut down or restart after several minutes, shut it down manually by pressing the power switch located on the rear of the unit in the a position for more than five seconds.
Saving and Restoring Configuration Data
You can save NSR configuration data to external media or restore the configuration data to the NSR.
Saving Configuration Data
Caution
Be aware that the following information is not saved:
•Records
•Network settings, date and time information, and other basic initial setup items (such as those set in “Basic Configuration” (page 16))
•Logs
1 Click [System] at the top of the window.
The “System Menu” screen appears.
Chapter 3 Basic Operation | 47 |
|
|