JUSB connector

Use this connector to connect a USB keyboard, mouse, USB flash memory or the RM-NS10 remote control unit to the NSR.

KLAN connectors (1 to 3)

Use these connectors to connect 10 Base-T, 100 Base-TX, or 1000 Base-T network cables to the NSR.

NIC1: Network cameras

NIC2: Remote Clients

NIC3: External storage devices**

LMonitor connectors (1 and 2)

Use these connectors to connect a monitor.

MAudio output connectors (L and R)

Use these connectors to output audio to a peripheral audio device.

NPower supply connector

Use this connector to connect the power cord.

*This feature is not currently supported.

**External storage devices may not be supported depending on the software version. For details, consult your dealer.

NSR-25

1

2

3

4

 

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

qa 0 9 8 7

AFan

Take care not to obstruct the fan grille. If the grille is obstructed, heat may build up in the unit, leading to damage and/or fire.

BPower switch

Press the switch in the a position to turn on the unit.

CSerial connector (RS-232C)

Use this connector to connect the control line of the uninterruptible power supply (UPS).

DSensor input connector

Use this connector to connect the sensor input lines.

For connection details and wiring diagrams for sensor inputs, see the “I/O Port” (page 170).

Chapter 1 Introduction

12