
Reconstructing Data Volume (Changing RAID Types) (Only the
RAID constructions that can be set as data volumes differ depending on the model number of the NSR.
* RAID is not available for the
Model | Type | Approximate | Redund- | Default |
|
| capacity | ancy | setting |
|
|
|
|
|
670 GB | Yes | Yes | ||
|
|
|
|
|
| 450 GB | Yes |
| |
|
|
|
|
|
| 900 GB | None |
| |
|
|
|
|
|
Spanning | 430 GB | Partial | Yes | |
|
|
|
|
|
| 210 GB | Yes |
| |
|
|
|
|
|
Caution
•Be aware that all settings information and recorded images are deleted when reconstructing data volume.
•When changing the settings is necessary, make sure to change the RAID construction beforehand.
1 Connect the USB keyboard and USB mouse to the NSR, and turn on the power.
The following screen and a progress bar for hardware startup appear.
2 Press F12 on the keyboard while the progress bar is displayed.
The screen similar to the following appears.
Example: For the
*The number of devices and their names may differ from the following example screen.
Boot Menu
1.QSI
2.WDC
3.WDC
4.PQI IDE
<Enter Setup>
Chapter 2 Initial Configuring the System | 36 |
|
|