MAC Address
Displays the MAC address of the camera. Detected by the IP Setup protocol.
Model
Displays the model of the camera. Detected by the IP Setup protocol.
Serial No.
Displays the serial number of the camera. Detected by the IP Setup protocol.
DHCP
After automatic detection, check boxes are selected for all cameras with DHCP set in the network settings. If you want to set IP addresses, the check boxes need to be cleared.
IP address
Set the IP address. After automatic detection, the IP addresses detected by the IP Setup protocol are displayed. If you want to set the IP addresses, the DHCP check boxes need to be cleared.
Note
You can set the IP addresses for multiple cameras simultaneously in [Set following settings to all selected Cameras] below the list.
Port
Set the port number of the camera. After automatic detection, the port numbers detected by the IP Setup protocol are displayed.
Note
You can set the port numbers for multiple cameras simultaneously in [Set following settings to all selected Cameras] below the list.
User
Set the user name of the camera administrator.
Password
Set the password of the camera administrator.
Notes
•The user name and password set here are used to access cameras. They are required when you set the IP address and port.
•You can set the administrator user names and passwords for multiple cameras simultaneously in [Set following settings to selected Cameras] below the list.
Version No.
Displays the software version of the camera. Detected by the IP Setup protocol.
Name
Displays the camera name of a registered camera.
Summary of the Lists
Displays “Found Cameras”, “Registered Cameras”, and “Unregistered Cameras.”
Set following settings for selected Cameras
This function enables you to input the same settings for multiple cameras simultaneously.
Chapter 5 Settings 95