screen for a camera already registered on the NSR, the IP address is determined from the DNS, compared with detected camera IP addresses, and then a judgment is made.

Check

Select the check boxes of the cameras you want to register. To select all the check boxes, click [Select All].

#

Sequential numbers are assigned to the cameras in the order of detection. These numbers are assigned only for display purposes and are not for indicating anything like priority order.

Network

Displays the network device number of the NSR.

Name

Displays the name assigned to the camera.

CH

If there are multiple channels as is the case with SNT-V704, each of the channels is considered to be a different camera and is indicated by a channel number. You can select whether to register each channel individually.

DHCP

Check boxes are selected for all cameras with DHCP set in the network settings. This item cannot be modified.

IP address

Displays the IP address settings of the cameras. Detected by the IP Setup protocol. This item cannot be modified.

Port

Displays the port number of the camera. Detected by the IP Setup protocol. This item cannot be modified.

User Name

Set the user name of the camera administrator.

Password

Set the password of the camera administrator.

Notes

The user name and password set here are used to access cameras.

You can set the administrator user names and passwords for multiple cameras simultaneously in “Set following settings to selected Cameras” below the list.

MAC Address

Displays the MAC address of the camera. Detected by the IP Setup protocol. This item cannot be modified.

Model

Displays the model of the camera. Detected by the IP Setup protocol. This item cannot be modified.

Serial

Displays the serial number of the camera. Detected by the IP Setup protocol. This item cannot be modified.

Chapter 5 Settings 98