(Preview)
Click this button to confirm the operation of the filtering used in the configured package.
Duration ([Existing] and [Unattended/Removed] Filter Types Only) When using the [Existing] filter type, enter the amount of time for RealShot Manager to wait before triggering an alarm, after an object is detected as moving. The default value is 0.
When using the [Unattended/Removed] filter type, enter the amount of time for RealShot Manager to wait before triggering an alarm, after an object is detected as unattended.
Note
When an object is detected as unattended, its
Capacity ([Capacity] Filter Type Only)
Enter the maximum number of objects that can be detected in the configured area before an alarm is triggered.
Collision ([Passing] Filter Type Only)
Click [V], and from the list that appears, select the object’s center of gravity or the side of the object that will trigger an alarm when it crosses the configured line.
[LIVE] Button
Click this button to display the live camera image.
When you click this button, the camera control panel appears.
For a camera equipped with pan, tilt, and zoom functions, use these buttons to control the pan, tilt, and zoom of the camera; to change the direction and zoom of the camera for easier configuration of detection areas; and to confirm whether the camera moves properly in the detection area you set.
[PRESET] Button
To move the camera to a preset position, click [V], and select a preset from the list that appears.
Caution
You can only move the camera to a preset position with this option. You cannot set a VMF package for each preset position.
Chapter 5 Settings 120