13 Configure each item, and then click [Accept].

Configure the settings depending on your network.

When using a DHCP server to configure address settings automatically

Select [DHCP].

When wanting to configure addresses manually

(1)Select [Static].

(2)Enter the following information.

IP Address

Enter the desired IP address.

Notes

•Before you enter the desired IP address, make sure that it is not already used on the network. Entering an IP address already in use may lead to erratic operation of the unit, but no error messages appear to indicate the fact.

•Because of IP address attribution rules, setting invalid addresses such as the ones below are not allowed.

Example: 224.0.0.0 to 255.255.255.255 0.0.0.0

127.0.0.1, etc.

Netmask

Enter the subnet mask address.

Note

The default settings for network devices are as follows.

IP Address:192.168.[0/1/2]*.1

Netmask: 255.255.255.0

*The settings for each of the network devices #1, #2, and #3 (only network device #1 for the NSR-25).

Chapter 2 Initial Configuring the System

29