Indefinitely
Select this option if you want to let the NSR beep until another event stops it.
You must, however, select what events will stop the beep beforehand.
•When [Stop Beep] is selected
This option is just for stopping the beep. There are no settings to configure.
Caution
While the beep is sounding, audio monitoring from the camera is paused. However, audio recording is performed as normal.
• When [Change Monitor Layout] is selected
Monitor Layout
Select the monitor layout to display on monitor 1.
Change to previous layout
Select this check box to return to the original, unchanged layout after an action is triggered.
After event
Select this option to return to the original layout when the event ends.
Duration
Select this option to return to the original layout after a specified duration.
• When [Activate Alarm Output] is selected
Alarm Out
Select the alarm output name for which to turn on the alarm output.
Note
When you set the time for the alarm output to go on, also set the pulse interval in the alarm output settings.
Chapter 5 Settings 134