received and recorded, but it cannot be displayed on the monitoring screen.
Storage Settings
You can specify the storage location the camera uses for each recording type.
Alarm
Select the storage location for the camera to save alarm recordings.
Manual
Select the storage location for the camera to save manual recordings.
Normal
Select the storage location for the camera to save normal recordings.
Caution
If the storage settings are modified, the new settings are reflected from the first recording to start thereafter. If a camera’s storage settings are modified while a recording is in progress, they are not reflected in the current recording.
Setting a Camera by Using Generic Camera
This version of NSR supports the “Generic Camera.” NSR obtains various information data from a camera when registering it and connects to the camera based on this information. Because the protocol and procedures for obtaining information from a Generic Camera are standardized, cameras sold in future will also be supported, provided that they follow the standard.
Note
This version of NSR supports Generic Camera version 1.
Operation flow when using Generic Camera
The procedure for registering and setting up a camera with the Generic Camera option is slightly different from regular camera registration. First, you must select a combination of functions and then perform setup. When you select the combination of functions, the setting range for each item is determined automatically. Therefore it is important to select the combination of functions carefully with regard to the intended use of the camera.
1 Registering a Generic Camera.
r
2 Selecting a combination of functions.
r
3 Making the required settings at the various setup screens.
After setting, be sure to check all setting values.
r
4 Starting operation.
Caution
•Available settings and setting value ranges will vary depending on the function combination. Be sure to make settings that are matched to the intended operation.
Chapter 5 Settings 106