27 Configure each item below, and then click [Accept].

Enable

Select this check box when you use a UPS.

If you select this check box, select your UPS from the list.

Disable

Select this check box when you do not use a UPS.

Power off In XXX Seconds

Enter the time before shutting down the unit after a power interruption is detected.

28 When the settings are complete, click [Quit].

The completed system settings are saved to DiskOnModule (DOM). While the settings are being saved, a progress bar appears. When the process is complete, [OK] is enabled.

Caution

If the network settings have been modified, a network restart is performed. Be aware that during this period recording may not be possible for several seconds.

29 Click [Reboot] in the System Menu to restart the NSR manually.

Chapter 2 Initial Configuring the System

35