EAlarm output connector

Use this connector to connect the alarm output lines.

For connection details and a wiring diagram for alarm output, see the “I/O Port” (page 170).

FAudio input connector*

Use this connector to input audio from a peripheral audio device, such as a microphone.

GUSB connector

Use this connector to connect a USB keyboard, mouse, USB flash memory or the RM-NS10 remote control unit to the NSR.

HLAN connectors

Use these connectors to connect 10 Base-T, 100 Base-TX, or 1000 Base-T network cables to the NSR.

IMonitor connectors (1 and 2)

Use these connectors to connect a monitor.

JAudio output connectors (L and R)

Use these connectors to output audio to a peripheral audio device.

KPower supply connector

Use this connector to connect the power cord.

* This feature is not currently supported.

Chapter 1 Introduction

13