BStatus

Indicates the recording type (MANUAL REC, ALARM REC, or NORMAL REC) during recording.

Indicates the playback status (PAUSE, etc.) and play speed (+1x, –0.2x, etc.) during the playback of recorded images (“+” appears for the play speed when playback is in the forward direction and “–” appears for the play speed when playback is in the reverse direction).

CBandwidth

Indicates the bandwidth used for transferring images via the network connection.

DNumber of frames received

Indicates the camera image capture rate.

ENumber of frames displayed

Indicates the rate at which camera images are refreshed on the monitor.

FLive/Recorded image

Displays a live image or a recorded image. Video Motion Detection (Recorder) object frames and VMF (Video Motion Filter) object and filter frames also appear.

GTime

Indicates the current date and time when live images are being monitored or recorded, or the recording date and time when recordings are being played back.

You can configure the display format in the Configuration window. t “General” (page 84)

Notes

•When there is a sensor input or a specified sensor input, or a motion detection or VMF package alarm occurs, the image of the corresponding camera is displayed in the monitor window set for the hot spot.

•If there is sensor input or a motion detection or VMF package alarm occurs, a red frame appears around the corresponding camera images.

To switch the monitor window layout

If you double-click a monitor window, the monitor layout switches to a 1 x 1 display of the images from the camera assigned to that monitor window. However, the display is not changed if 1 x 1 is disabled for the monitor layout currently in use.

Note

Double-clicking the monitor window again returns the monitor layout to the original layout.

However, once the monitor layout is switched to a 1 x 1 display, if it is switched again by an action, monitoring sequence, or monitor layout change, then double- clicking the monitor window again does not return the monitor layout to the original layout.

To hide various information

You can hide various information in a monitor window by right-clicking the monitor window and then clearing the check boxes in the menu that appears. This change is not reflected and saved in the monitor layout settings of the Configuration window.

Chapter 4 Monitoring Live Images

58