Notes

•When you use RAID 0 with the NSR-100, spanning with the NSR-50, or the NSR-25 there is no data redundancy. Also, storage capacity varies according with the RAID level.

•RAID is not available for the NSR-25.

Easy monitoring operation by remote control

In addition to using your keyboard and mouse to operate the NSR, but you can also use the joystick and buttons of the optional RM-NS10 remote control unit. Furthermore, the screen layout is based on equally split screen segments, and can be used seamlessly with a conventional recorder.

Note

You will need to use your keyboard and mouse to make initial NSR settings.

Other features

•You can monitor, record, play back, and operate images from cameras that support 1,280 ⋅ 960 pixel size.

•You can display the images from up to 64 cameras (8 ⋅ 8 images) on one screen.

•The NSR is capable of manual, scheduled, and alarm recording, among others.

•The NSR is equipped with a motion detection function1) (Video Motion Detection (Recorder)).

•Run searches for recorded images by camera name, date, alarm, and other methods.

•Create privacy zones by using the dynamic masking functions2). Dynamic masking covers pan, tilt, and zoom.

•Precise alarm processing is made possible by performing the various types of filtering3) that use the image processing results sent from the camera in the form of object information metadata. Because filtering can be applied to metadata that has already been recorded, you can also search for areas of interest after recording is finished.

•With an internal drive, the NSR-100/50 is capable of writing data to DVD-R, DVD+R, or CD-R/RW media.

The NSR-25 is capable of writing data to CD-R/RW media.

•Audio recording and playback4) are also supported for compatible cameras.

1)Some functions are limited depending on the number of cameras connected.

2)Some functions are limited depending on which camera models are connected.

3)To perform motion detection and object detection using metadata, a camera that supports motion detection by metadata is required. The use of metadata is supported for up to 32 cameras.

4)The optional active speakers are required.

Chapter 1 Introduction

7