xFor the SNC-RZ30 and similar cameras

Drag the red frame with your mouse to configure a motion detection area. By dragging each edge of the detection area, you can change its size. Detection areas cannot be deleted.

Caution

The VMD (Camera) setting cannot be configured when the mount angle is set to 90 or 270 degrees.

Threshold

Enter a value from 0 to 255 as the threshold for motion detection.

The motion detection processor uses this value as the standard value for determining whether motion has occurred between two video frames.

Sensitivity

Enter a value from 0 to 8 as the sensitivity level.

Normally, you do not need to configure this setting.

xFor the SNC-P1 and similar cameras

You can set up to four motion detection areas. The name of the area being configured is displayed in blue.

Drag the red frame with your mouse to configure a motion detection area. By dragging each edge of the detection area, you can change its size.

Chapter 5 Settings 126