Name

Enter the sensor input name in this text box.

Invert

Select this check box when you want to invert the pulse polarity (for example, when you want to invert high t low to low t high).

Enable

Select this check box when you want to enable the sensor input.

3 Once you have configured all the desired settings, click [Save] in the upper- right corner of the window.

The settings are applied.

If you want to ignore all your setting modifications, click [Discard].

Setting a Video Motion Detection (Camera) Pin

To use the camera-based motion detection and object detection functions (Video Motion Detection (Camera)), follow the steps below to configure a Video Motion Detection (Camera) pin and a motion detection or object detection area. The settings available for motion detection and object detection areas will differ depending on your camera.

Notes

•Whether Video Motion Detection (Camera) supports both motion detection and object detection differs depending on the camera.

•Video Motion Detection (Camera) cannot be used with the SNT-V304 and the SNT-V501.

Caution

•With NSR, metadata transmission from a camera cannot be used in tandem with the Video Motion Detection (Camera) setting on that camera. If the Video Motion Detection (Camera) setting is enabled, the Video Motion Filter setting of the camera will be disabled.

•Object detection requires an approximately 40 second initialization period before starting.

1 Click [Sensor Input] in the tree on the left side of the window.

2 Select the camera below [Sensor Input], and click the Video Motion Detection (Camera) pin you want to configure.

The “Sensor Input” screen appears.

Chapter 5 Settings 124