Note

When using the NSR-100/50, connect the following devices to each of the LAN ports.

LAN 1: Network cameras

LAN 2: Remote clients

LAN 3: External storage devices (This may not be supported depending on the software version. For details, consult your dealer.)

10 To configure general settings, click [General Setting] and then [Select].

The [General Network Setting] screen appears.

11 Configure each item below, and then click [Accept].

Primary DNS

Enter the IP address for the primary DNS (Domain Name Server). Skip this entry if a primary DNS is not available or not required.

Secondary DNS

Enter the IP address of the secondary DNS. Skip this entry if a secondary DNS is not available or not required.

Default Gateway

Enter the IP address of the default gateway. Skip this entry when only a local network is used or when connections to other networks are not required.

Hosts Setting

If a host name needs to be registered in the hosts file, enter the IP address and corresponding host name, and then click [Add] to add it to the list.

12 To configure each LAN port, click [Network Device] and then [Select].

Configure the “Network Device” settings for each of the LAN ports. The [Network Device] screen appears.

Chapter 2 Initial Configuring the System

28