•When configuration data is restored, any recording operations that were in progress automatically stop. If you set a recording schedule, recording restarts automatically after data is restored. If you were performing manual recording, you must restart manual recording again after data is restored.
1 Click [System] at the top of the window.
The “System Menu” screen appears.
2 Click [Restore Configuration Data].
The “Restore Configuration Data” screen appears.
3 Select the location of the configuration data and the desired data, and then click [Restore].
A message appears notifying the user that this operation will require an NSR reboot.
4 Click [OK].
During restoration, a progress bar appears. When restoration is complete, the NSR reboots and the configuration data is restored.
Chapter 3 Basic Operation | 49 |
|
|