Caution

The VMD (Camera) setting cannot be configured when the mount angle is set to 90 or 270 degrees.

Area1 to Area2

Select the check boxes of the detection areas to enable.

Sensitivity

Set a value from 1 to 9 as the sensitivity level.

Normally, you do not need to configure this setting.

xFor the SNC-RX550, Generic Camera, and similar cameras

You can set up to four motion detection or object detection areas. The name of the area being configured is displayed in blue. Drag the red frame with your mouse to configure a motion detection area. By dragging each edge of the detection area, you can change its size.

Detection areas cannot be deleted.

Caution

The VMD (Camera) setting cannot be configured when the mount angle is set to 90 or 270 degrees.

Chapter 5 Settings 128