3
4
Configure each item.
Name
Enter a name for the pin.
Pulse
Select this check box when you wish to specify a pulse duration and input a pulse.
If you select this check box, enter a value for [Pulse Duration].
Pulse Duration
Enter the duration in milliseconds to sustain pulse input from the VMD (Camera) pin once it is turned on.
Invert
Select this check box to invert the pulse polarity.
Enable
Selecting this check box enables use of the VMD (Camera) pin.
Click [Set VMD (Camera)].
The screen for configuring motion detection and object detection areas appears.
The configuration screen and settings available for this item will differ depending on the camera.
Caution
When the configuration screen is opened, the Video Motion Filter settings for the camera are disabled.
Note
For a camera equipped with pan, tilt, and zoom functions, use the camera control panel to control the pan, tilt, and zoom of the camera; to change the direction and zoom of the camera for easier configuration of detection areas; and to confirm whether the camera moves properly in the detection area you set.
Chapter 5 Settings 125