8 Perform the following steps to configure the network settings.

(1)Enter an IP address for each server in the [General Network Setting] screen, and click [Next].

Primary DNS

Enter the primary DNS (Domain Name Server) IP address.

When there is no primary DNS or one is not necessary, do not enter an IP address.

Secondary DNS

Enter the secondary DNS IP address.

When there is no secondary DNS or one is not necessary, do not enter an IP address.

Default Gateway

Enter the default gateway IP address.

When only the local network is used or connection to other networks is not necessary, do not enter an IP address.

The [Network Device #1] screen appears.

(2)Configure the [Network Device] settings for each of the LAN ports. When using the NSR-100/50, configure the settings for each of the three LAN ports (LAN1, LAN2, and LAN 3).

When using the NSR-25, configure the settings for the single LAN port (LAN1).

Note

When using the NSR-100/50, connect the following devices to each of the LAN ports.

LAN1: Network cameras

LAN2: Remote clients

LAN3: External storage devices (This may not be supported depending on the software version. For details, consult your dealer.)

Chapter 2 Initial Configuring the System

19