System Requirements

The hardware required in order to use this recorder are as follows.

•Sony network cameras

Contact your dealer for details about compatible Sony network cameras.

•Monitor1)

•USB keyboard2)

•USB mouse3)

•Network switch

•1000Base-T/100Base-TX/10Base-T cable

•CF (CompactFlash) card or USB memory device4)

1)For details about monitors supported by the NSR, contact your retailer. The following “Generic” type monitors can be selected.

Frequency is indicated at the end of each line.

-Generic LCD Display; LCD Panel 1024×768; 40-70

-Generic LCD Display; LCD Panel 1280×1024; 50-75

-Generic LCD Display; LCD Panel 1600×1200; 60

-Generic CRT Display; Monitor 1024×768; 50-70

-Generic CRT Display; Monitor 1280×1024; 50-90

-Generic CRT Display; Monitor 1600×1200; 50-90

The following resolutions can be specified.

-XGA (1024×768)

-SXGA (1280×1024)

-UXGA (1600×1200)

2)Use a USB keyboard with a cable. However, keys other than the standard may not function. Wireless or infrared USB keyboards may also not function properly.

3)Use a USB mouse with a cable. However, three-button or wheel mice may not function properly. Wireless or infrared USB mice may also not function properly.

4)Required when backing up system information such as logs.

-For CF, use a card that has been formatted in advance with VFAT.

-For USB memory, use a device that supports general USB Mass Storage Class specifications.

-CF cards are not compatible with the NSR-25.

Chapter 1 Introduction

14