Sony SDX-1100V/R manual Appendix C ASC & Ascq for AIT Sony Unique, Byte

10.APPENDIX C: ASC & ASCQ for AIT (Sony Unique)

10. APPENDIX C: ASC & ASCQ for AIT (Sony Unique)

		ASC and ASCQ Assignments for AIT drive (Sony Unique)
BYTE		Numeric Order
12	13	DESCRIPTION
83h	00h	Reserved
83h	01h	MIC Header Error
83h	02h	No MIC Detected
83h	03h	MIC Checksum Error
83h	04h	MIC out of memory
83h	05h	No Data Body Detected in the MIC
83h	06h	MIC Read Error
83h	07h	No Cassette Detected
83h	08h	MIC is not formatted yet
83h	09h	MIC Write Fault
83h	0Ah	Requested address is write protected on the MIC
83h	0Bh	MIC is broken
83h	0Ch	MIC format type is undefined
83h	0Dh	MIC capacity field indicates illegal value. Acceptable value is 2Kbytes, 4Kbytes, 8Kbytes.
83h	0Eh	The drive will handle the MIC is 2Kbytes, when capacity field indicates illegal value.
:		Reserved
83h	7Fh
83h	80h	Partition count exceeded
83h	81h	Reserved
83h	82h	Reserved
83h	83h	MIC is exist but is not used
83h	84h	Reserved
83h	86h
83h	87h	Broken MIC is loaded in AIT mode
83h	88h	Reserved
83h	89h	User Volume Note Size mismatch
83h	8Ah	User Partition Note Size mismatch
83h	8Bh
:		Reserved
83h	96h
83h	97h	Current Partition is not the last partition.
83h	98h	Cannot append the new partition, because the remaining capacity too short.
83h	99h	Cannot delete partition, because the indicated partition number is not appropriate.
83h	9Ah	Encounter the EOT while creating the new partition, append partition command is not
		completed. (If a drive misleads the tape capacity by some reason, format command will be
		failed on the way. In case of the situation, the Last Partition Number must hold the Last
		Valid Partition Number, because it is reasonable and time saving. )
83h	9Bh	Cannot format tape because real tape capacity is exceeded.
83h	9Ch	Cannot append new partitions because the MIC is out of memory.
83h	9Dh
:		Reserved
83h	FFh

SONY AIT-5 drive SDX-1100V series Ver.1.0 10-1