6.Command Specification | MODE SENSE |
6.8.MODE SENSE (6/10) 1Ah and 5Ah
Table
Bit | 7 |
| 6 |
| 5 | 4 |
| 3 |
| 2 | 1 | 0 |
Byte |
|
|
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
| Operation | Code (1Ah) |
|
|
|
| |
1 |
|
|
| Reserved |
|
| DBD |
|
| Reserved |
| |
2 |
| PCF |
|
|
|
| Page | Code |
|
|
| |
3 |
|
|
|
|
| Reserved |
|
|
| |||
4 |
|
|
|
|
| Allocation Length |
|
|
| |||
5 |
|
|
|
|
| Control |
|
|
|
|
| |
|
|
|
| Table |
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit | 7 |
| 6 |
| 5 | 4 |
| 3 |
| 2 | 1 | 0 |
Byte |
|
|
|
|
|
|
|
|
|
|
|
|
0 |
|
|
|
|
| Operation | Code (5Ah) |
|
|
|
| |
1 |
|
| Reserved | LLBAA (0) |
| DBD |
|
| Reserved |
| ||
2 |
| PCF |
|
|
|
| Page | Code |
|
|
| |
|
|
|
|
| Reserved |
|
|
| ||||
|
|
|
|
| Allocation Length |
|
|
| ||||
9 |
|
|
|
|
| Control |
|
|
|
|
|
The MODE SENSE (6/10) commands provide a means to report parameter of default, current and changeable configuration parameters. They are complementary to MODE SELECT (6/10) commands. The
The format of the data returned is different for the
LLBAA: The LLBAA function is not supported. This field must be ZERO. This field is defined for MODE SENSE 10 only.
If this field is not set to 0b for a MODE SENSE (10) command, the command terminates with CHECK CONDITION status, the sense key set to ILLEGAL REQUEST, the ASC/ASCQ is set to INVALID FIELD IN CDB.
DBD: A Disable Block Descriptors (DBD) bit of ZERO indicates that the target may return ZERO or more block descriptors in the returned MODE SENSE data at the target's discretion. A DBD bit of one specifies that the target will not return any block descriptors in the returned MODE SENSE data.
PC: The Page Control field indicates the type of page parameter values to be returned to the initiator as shown below.
Table
Bit 7 | Bit 6 | Parameter Values | Description |
0 | 0 | Current Values | This is the normal default situation where the drive returns to the |
|
|
| initiator its current configuration. Page fields not supported are set to |
|
|
| ZERO by the drive. |
0 | 1 | Changeable Values | These are any values which a initiator may alter in a subsequent |
|
|
| MODE SELECT command. Any field that the drive allows to be |
|
|
| changed is set to one. Otherwise the field is set to ZERO. |
1 | 0 | Default Values | These are the default values on |
1 | 1 | Saved Values | Not supported by the drive |
Page Code: This allows the initiator to select any specific or all pages supported by the drive.
SONY |