Sony SDX-1100V/R manual Safety, Conditions of Acceptability

2.Specification

2.4.Safety

The SDX-1100V conforms to the following safety standards:

UL/cUL	UL60950
CE (LVD)	EN60950-1
CE (EMC)	EN55024 + EN55022: Class B
C-Tick (EMC)	EN55022: Class B
	AS/NZS CISPR22: Class B
MIC	CISPR22 + CISPR24
RPC/DoC	CISPR22
	IEC60950-1
CB report	IEC60950-1

2.4.1.Conditions of Acceptability

The SDX-1100V is for use only in equipment where the suitability of the combination has been determined by an appropriate certification organization (for example, Underwriters Laboratories, Inc. or the Canadian Standards Association in North America, and the British Standards Institution or Verband Deutscher Elektrotechniker in Europe). Other considerations include the following:

1.An enclosure must be supplied to limit the operator’s access to live parts, to provide system stability, and to furnish the drive with the necessary grounding integrity.

2.The necessary voltage supplies must be provided. These supplies are Extra Low Voltage SEC for UL and CSA, or Safety Extra Low Voltage for BSI, VDE, and so on, of +5V and +12V DC.

2.5.Installation Requirements

Note: Do not move the drive while it is operating. It may cause malfunction.

2.5.1.Power Requirements

Voltage		Max Ripple		Current
			Typical		Maximum
					2.5A
5V	± 5%	100 mV p-p	1.7A
12V	± 10%	150 mV p-p	0.87A		3.0A

* exclude SCSI terminator power

4.75V

0V

5V

T

12V

0V

10.8V

-300 ms < T < 300 ms

Figure 2-5: Power-up Sequence

Note: Voltage has to increase constantly during Power-up until Maximum is reached. Do not turn off the drive while the tape is in the drive.

SONY AIT-5 drive SDX-1100V series Ver.1.0 2-9