MODE SELECT

6.Command Specification

Supported page codes are:

Table 6-42: Supported MODE SELECT Page Codes

Page Code

Description

00h

Standard Sense

02h

Disconnect-Reconnect

0Ah

Control Mode Page

0Fh

Data Compression Control

10h

Device Configuration

11h

Medium Partitions Parameter

1Ch

Information Exception Control

31h

AIT Device Configuration

32h

Append Partition (obsolete)

33h

Delete Partition (obsolete)

3Fh

Return All Pages

 

 

Additional Page Length: Indicates the number of bytes in that page. The value does not, however, include bytes 0 and 1. The length is returned on MODE SENSE and must subsequently be set to the same value when performing MODE SELECT.

If the page length does not match that expected by the drive a CHECK CONDITION status is returned with the sense key to set to ILLEGAL REQUEST.

The drive also returns a CHECK CONDITION status with an ILLEGAL REQUEST sense key if the initiator sends an unsupported Page Code, a page field with values that are not supported or are not changeable. In this case, no parameters will have been changed by the command.

SONY AIT-5 drive SDX-1100V series Ver.1.0

6-43

Page 97
Image 97
Sony SDX-1100V/R manual Supported Mode Select Page Codes Description