Sprint Nextel PG86100 manual Disconnecting or Unpairing From a Bluetooth Device, 2I. Bluetooth 153

Disconnecting or Unpairing From a Bluetooth Device

To disconnect a Bluetooth device:

1.Press > , and then tap Settings > Wireless & networks > Bluetooth settings.

2.In the Bluetooth devices section, press and hold the device to disconnect.

3.Tap Disconnect.

To unpair from a Bluetooth device:

You can make your device forget its pairing connection with another Bluetooth device. To connect to the other device again, you may need to enter or confirm a passcode again.

1.Press > , and then tap Settings > Wireless & networks > Bluetooth settings.

2.In the Bluetooth devices section, press and hold the device to unpair.

3.Tap Disconnect & unpair, or tap Unpair if the Bluetooth device is currently not connected to your device.

Sending Information Using Bluetooth

You can use Bluetooth to transfer information between your device and another Bluetooth-enabled device such as a phone or notebook computer. The first time you transfer information between your device and another device, you need to enter or confirm a security passcode. After that, your device and the other device are paired, and you will not need to exchange passcodes to transfer information in the future.

You can send the following types of information, depending on the device you are sending to:

Images and videos

Calendar events

Contacts

Audio files

Important: Before you begin, set the receiving device to discoverable mode. You may also need to set it to “Receive Beams” or “Receive Files.” Refer to the device’s documentation for instructions on receiving information over Bluetooth.

1.On the device, open the application that contains the information or file you want to send.

Bluetooth

2I. Bluetooth 153