Sprint Nextel PG86100 manual Installing the Battery, Removing the Battery

Installing the Battery

1.With the device turned off, insert a coin or other flat object into the slot at the bottom of the battery compartment cover and lift up gently to remove.

2.Insert the contact end of the battery first, and then gently push the battery into place.

3.Replace the battery compartment cover and press until it snaps into place, making sure all the locking tabs are seated and there are no gaps around the cover.

Removing the Battery

1.Make sure the power is off so that you don’t lose any stored numbers or messages.

2.Remove the battery compartment cover. (See step 1 of “Installing the Battery.”)

3.Lift the battery out at the notch at the bottom of the battery compartment.

WARNING: Do not handle a damaged or leaking Li-Ion

battery as you can be burned.

Device Basics

2A. Device Basics 19