Sprint Nextel PG86100 manual Caller ID, Call Waiting, To switch back to the first caller

Caller ID

Caller ID identifies a caller before you answer the device by displaying the number of the incoming call. If you do not want your number displayed when you make a call, follow these steps.

1.Press and tap .

2.Tap .

3.Enter a phone number.

4.Tap .

To permanently block your number, call Sprint Customer Service.

Call Waiting

When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your device’s screen informs you that another call is coming in and displays the caller’s phone number (if it is available and you are in digital mode).

To respond to an incoming call while you’re on a call:

Press and then tap Flash.

This puts the first caller on hold and answers the second call.

To switch back to the first caller:

Press and then tap Flash again.

Tip: For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by pressing before placing your call. Call Waiting is

automatically reactivated once you end the call.

Sprint Service

3A. Sprint Service: The Basics 173