S100 User Guide – Rev. D – June 2005 31
2
5
3
Administrator Log-In
On the System Status Screen, click the Administrator Log-In link. After the security alert,
the following dialog is displayed.
Enter the default user name, admin, and default password, symmetricom. We strongly
recommend you change these settings as soon as possible.
(You may log off by clicking Log Out at the top of each screen in the interface. More about
logging off can be found in “Logging Off” on page 85.)
System Status: Logged In
Once logged in, you see the System Status screen again except now it has more information.
In Versions, this information refers to the current software in the S100. In the NTP Host
Reachability, this example shows that the IP address was accessed eight times and provides
additional details.
Figure 3-13: Logging In
Figure 3-14: Full System Status
Configuration Wizard