Chapter 4

The Web-Based Interface

Overview

The following is a description of the web-based software interface that you use to manage the S100.

This material is designed to be a reference for you as you use the S100. It also describes some of the procedures that will help you begin using the S100.

Symmetricom recommends you review this section before beginning the permanent installation of the S100, so that you will be familiar with it when you need to use it.

For detailed information about NTP (Network Time Protocol), use the NTPD Help link (see “NTPD Help” on page 84) embedded in the S100’s web interface to review the NTP Distribution document (source: University of Delaware).

Additional information is available at http://www.ntp.org/.

Interface: Screen Reference

The S100 management interface has been designed with ease of use in mind. As a result, you access the management interface S100 through any web browser. This section describes the screens used in the interface, including their functions. It supplies some procedural instructions, as well.

Each dialog or screen, except in the Configuration Wizard, lets you refresh that screen or open a new window, and all will let you log out.

For security reasons, the interface will time out after 30 minutes if there is no activity.

S100 User Guide – Rev. D – June 2005

53

Page 61
Image 61
Symmetricom S100 manual Web-Based Interface, Interface Screen Reference