Symmetricom S100 manual Setup Complete dialog, Dialup Settings dialog

SyncServer S100

There is no output to the “Mail test” field. That is because mail is tested by sending an e-mail to the address that was not provided earlier.

Click Finish.

Setup Complete dialog

Figure 3-23:Your GPS set-up is complete

This screen verifies your configuration of the S100:

•Its time source

•Modem phone number (if you designated dial-up as the backup source for time)

•Host name and System location

•Administrator e-mail

Dialup Settings dialog

When using dial-up, the time reference is coming from an analog phone line through the built- in modem. Automated Computer Time System (ACTS) is maintained by NIST.

In the US, use either of the following phone numbers to access time:

•Colorado: (303) 494-4774

•Hawaii: (808) 335-4721

Outside the US, connect with your local measurement institute.

38 S100 User Guide – Rev. D – June 2005