SyncServer S100
Other Information
The following screens give additional information about the S100.
Engine Time
The engine time is read directly from the timing engine.
Figure 4-18: Timing Engine Time
Clock Settings
The clock settings here are:
Figure 4-19: Clock Settings
Oscillator - This is internal to the timing engine.
DAC Value - A
Jam Control - “Jam” refers to jam synchronization. This controls whether or not the software may “jam” the clock circuitry if a phase discontinuity of greater than 1 millisecond is found.
Battery Status - The timing engine’s battery status is noted here.
Clock Value - This register shows the number of 100ns steps needed to advance or slow down the phase of the local clock circuit.
70 | S100 User Guide – Rev. D – June 2005 |
