Peripheral Equipment
TANDBERG 8000 MXP DNAM configuration
TANDBERG 6000 MXP Profile DNAM configuration
Center Speakers + Integrated Stereo Speakers
The DNAM Amplifier*:
3 x 50W continuous average Center Output Power (load specified by DNAM Center Speakers).
2 x 50W continuous average Stereo Output Power (load specified by TANDBERG Loudspeaker Stereo Kit).
Full dynamic range for audio (high fidelity range)
Digital Signal Processing and Filtering on all channels for best audio detail clarity
Digital Crossover Filtering on center channels.
In/out:
Audio In - S/PDIF (stereo) or Analog (mono), using the same connector.
Differential In - (female XLR pinout: 1 - GND, 2 – Signal (+), 3 – Signal
Loop Out - line out directly from the input, always analog even with S/PDIF in.
Stereo Out - (male XLR, common GND configuration)
Fuse 2A 250V Slow, 5 x 20mm, Littelfuse type 215002.
233
