TANDBERG 880 MXP, 990 MXP, 770 MXP user manual Appendix 15 System Upgrade

Appendices

Appendix 15: System Upgrade

System Upgrade

Before starting the software upgrade of the TANDBERG MXP system, please make sure to have the new software file, (for instance s050000F30.pkg) and the Release Key for this software available. Your TANDBERG Partner will provide this for you.

All options and settings will automatically be stored when upgrading, so no backup is necessary.

If the system upgrade process is aborted before it's complete, the system will work as normal with the original software

The TANDBERG MXP systems can be upgraded in three different ways;

ƒUsing the web interface

ƒUsing FTP

ƒUsing ISDN

A)To upgrade using the web interface, please do the following steps:

1.Type the IP address of the TANDBERG MXP system that shall be upgraded (for instance 10.0.8.77) in a standard browser, such as Internet Explorer 6.0.

2.The web interface of the codec will then be displayed. Select the ‘System Configuration’ tab on top of the page, and then the sub-tab ‘Upgrade’.

The following page will now be displayed:

275