TANDBERG 880 MXP Picture Control, Focus Auto, Manual, Camera Brightness Auto, White Balance Auto

General Use

3.10.5Picture Control

Focus, Brightness and White balance are set for auto focus, auto brightness and auto white balance by default. If you need to set focus, brightness and white balance manually, go to Picture Control in the Camera Control menu.

Focus

Auto		Auto focus continuously updates the focus throughout the call. When moving
		the camera, the system will use auto focus for 5 seconds to set the right focus
		of the new camera position. After 5 seconds auto focus is turned off to prevent
		continuous focus adjustments of the camera.
Manual		When Manual is selected, the slide bar is enabled. Use the arrow keys to adjust
		the focus. The temporary focus will last until you move the camera again and
		auto focus will take effect.
Camera Brightness
Auto	Auto brightness continuously updates the brightness of the camera picture.
Manual	When Manual is selected, the slide bar is enabled. Use the arrow keys to manually
	adjust the camera brightness. If brightness is set manually, the system will keep
	this brightness level also when the camera is moved. When the user zoom or
	move the camera and manual brightness is on, the indicator line should say
	“Manual Brightness”.
White Balance
Auto	Auto white balance continuously updates the white balance.
Manual	When Manual is selected, the slide bar is enabled. Use the arrow keys to
	manually adjust the white balance. The manual white balance has 10 steps. If
	white balance is set manually, the system will keep this white balance also when
	the camera is moved. When the user zoom or move the camera and manual
	white balance is on, the indicator line should say “Manual White Balance”.

71