TANDBERG 770/880/990 MXP
2 Audio Outputs
1 output (line level) via RCA connector providing audio from far end in addition to dial tones. This output is used by the monitor. This output also supports S/PDIF.
1 VCR output (line level) via RCA connector providing a mixed signal between audio from the local side (except from the VCR input) and audio from the far end. This output is intended for connection to a VCR.
Audio output connector specification:
| Connector label |
| Audio outputs |
|
|
|
|
|
|
| Signal type |
| Unbalanced |
|
|
|
|
|
|
| Connector (codec) |
| Female RCA/phono, |
|
|
|
|
| |
|
|
|
|
|
| Output impedance |
| 680 ohms |
|
|
|
|
|
|
| Max output level when set |
| 15.5 Vpp |
|
| to maximum output level |
|
|
|
| and volume control set to |
| 1.2 Vpp |
|
| max. |
|
|
|
| Max output level when set |
|
|
|
| to minimum output level and |
|
|
|
| volume control set to max. |
|
|
|
|
|
|
|
|
| Range, menu adjustable |
| 22.5 dB (16 steps of 1.5 dB)* |
|
| output gain |
|
|
|
|
|
|
|
|
| Volume control attenuation |
| 0 to 21 dB + mute (steps of 1.5 dB) |
|
| (audio out 1) |
|
|
|
*Additional attenuation is possible on room/loudspeaker audio output using the volume control setting
224
