TANDBERG 770/880/990 MXP
Route the power cord so as to avoid it being walked on or pinched by items placed upon or against it. Pay particular attention to the plugs, receptacles and the point where the cord exits from the apparatus.
Do not tug the power cord
If the provided plug does not fit into your outlet, consult an electrician.
Never install cables, or any peripherals, without first unplugging the device from it's power source.
*Always use the power supply
*Replace only with power supply
*Never connect attached power supply
Servicing
Do not attempt to service the apparatus yourself as opening or removing covers may expose you to dangerous voltages or other hazards, and will void the warranty. Refer all servicing to qualified service personnel.
Unplug the apparatus from it's power source and refer servicing to qualified personnel under the following conditions:
-If the power cord or plug is damaged or frayed.
-If liquid has been spilled into the apparatus.
-If objects have fallen into the apparatus.
-If the apparatus has been exposed to rain or moisture
-If the apparatus has been subjected to excessive shock by being dropped.
-If the cabinet has been damaged.
-If the apparatus seems to be overheated.
-If the apparatus emits smoke or abnormal odor.
-If the apparatus fails to operate in accordance with the operating instructions
Accessories
Use only accessories specified by the manufacturer, or sold with the apparatus.
Communication lines
Never touch uninstalled communication wires or terminals unless the telephone line has been disconnected at the network interface.
Do not use communication equipment to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord (ISDN cables).
*Applies to the following products: T150 MXP, T550 MXP, T770 MXP, T880 MXP, T990 MXP, T1500 MXP, T1000 MXP, T2000 MXP, T3000 MXP Profile, Tandberg Codec 3000 MXP, Tandberg Tactical MXP Edge 75/85/95 MXP.
viii
