Taylor C118, C116, C117 manuel dutilisation English, CONTROL PANEL Alphanumeric display, SET signal

5.2 CONTROL PANEL

Alphanumeric display

After switching the machine on, an abbreviation made up by one letter and two numbers appears on the display: for example the abbreviation M 1.3 indicates the type of programme M = BATCH FREEZER (MANTECATORE) and 1.3 = SOFTWARE VERSION NUMBER.

SET signal

This led lights up when a granita production programme is selected.

STOP/DECREASE VALUE pushbutton (↓)

This pushbutton has 2 functions:

1.Whatever machine working cycle is in progress, press STOP to cancel any function in progress. Whether in automatic or is semi- automatic cycle, never stop the machine when the ice-cream is about to reach its maximum consistency; always remember this if you want to extend the life of the driving belt and of the agitator motor.

2.During SEMI-AUTOMATIC cycles, press STOP to decrease the selected value.

CLEANING/INCREASE VALUE pushbutton (↑)

This pushbutton has 2 functions:

1.When the machine is in STOP function mode, press CLEANING to start the agitator motor at reduced speed.

2.By pressing CLEANING during any other machine working cycle, the agitator motor keeps running at reduced speed and the compressor stops.

3.When the machine is in SEMI-AUTOMATIC function mode, press CLEANING to increase the selected value.

DELIVERY/CONFIRM VALUE pushbutton (↔)

This pushbutton has 2 functions:

1.When the machine is in STOP function mode, press DELIVERY to start the agitator motor at reduced speed and after a few seconds the motor will reach high speed automatically. By pressing DELIVERY during any other machine working cycle, the agitator motor increases its speed within a few seconds from low speed to high speed, and the compressor is disabled.

2.When the machine is in SEMI-AUTOMATIC function mode, press DELIVERY to confirm the selected value.

9 - ENGLISH