5.4 GRANITA PRODUCTION
5.4.1 “COFFEÈ” GRANITA (crushed-ice drink)
In this production cycle it is possible to set and programme the processing time and not the consistency value as for the
-To switch to the GRANITA CAFFE’ function mode, press the STOP and PRODUCTION pushbuttons simultaneously. The SET led lights up to signal that the GRANITA mode is now active and the display visualises the last time value (expressed in minutes) which has been set manually.
-Press STOP (↓) and CLEANING (↑) pushbuttons to decrease or increase the processing time for the production of granita. Once the required value has been set, press DELIVERY (↔) to confirm the programme and start the cycle.
The maximum programmable time is 10 minutes.
-During this cycle the compressor keeps on working without interruptions, while the agitator stops for 10 seconds and runs for half a second alternately. After the programmed time has elapsed, the PRODUCTION pushbutton blinks and an intermittent beep is released.
-Press the STOP pushbutton and deliver the product.
5.4.2GRANITA “SICILIANA”
In this production cycle it is possible to set and programme the consistency values, exactly as the ice- cream
- To switch to the GRANITA SICILIANA function mode, press the STOP and
- Press STOP (↓) and CLEANING (↑) pushbuttons to
decrease or increase the required consistency value (within a range between 120 and 180). After setting the required value, press the DELIVERY pushbutton (↔) to confirm the programme and start the cycle.
The recommended value ranges between 140 and 160.
-During this cycle the compressor and the agitator keep on working without interruptions. Once the programmed consistency value has been reached, the SEMI- AUTOMATIC pushbutton blinks and an intermittent beep is released.
-Press the STOP pushbutton and deliver the product.