Toshiba e-STUDIO211c/311c Bypass Copying on Non-standard Size Paper, Then press the lower SET key

Bypass Copying on Non-standard Size Paper

The size of non-standard paper is within the following ranges:

Length: 100 ~ 305mm Width: 148 ~ 457mm Page 6-5 (table)

1Perform steps 1 to 3 on page 6-7.

2Press the NON-STANDARD key.

3Key in each dimension (length and width) with the digital keys, or recall the data stored in the MEMORY.

Then press the lower SET key.	6
- When using the digital keys to key in the size:
Key in the length with the digital keys and press the upper
SET key. Simlarly, set the value for the width.

-Press the MEMORY 1 ( MEMORY 2 , MEMORY 3 or MEMORY 4 ) key and the paper size memorized in the MEMORY 1 appears.

-Storing a non-standard size in the memory Page 6-10

Select other copy modes as required.

4 Press the START key.

6-9