Toshiba e-STUDIO211c/311c manual Automatic Paper Selection APS

1. PAPER SELECTION

Automatic Paper Selection (APS)

When you place regular-sized originals on the glass or in the reversing automatic document feeder (optional), the built-in sensors automatically work to detect the size of the originals, helping the copier select and copy on paper that is the same size as the original.

*Depending on the condition of the original, automatic paper selection may not work correctly. In that case, select the paper size manually. Page 3-3

*This mode can only be used for actual-size (100%) copying.

*Original sizes capable of automatic detection Page 2-9

3

1Place paper in the drawer(s). Page 2-4

2Place the original(s). Page 2-9

3Confirm that the Automatic Paper Selection mode (default setting) is selected on the basic screen.

-If the Automatic Paper Selection mode is not selected, press the ZOOM··· key, then press the APS key on the next screen.

-If the following messages are shown, proceed the indica- tions as you are told to:

Change direction of original

Set correct cassette

When the selected drawer size and the original size are the same, the copier rotates the original data 90° and makes a copy in the same size as the original even if those directions differ (e.g. an A4-size original is set while the same size pa- per is set in R direction). This function, however, is applicable to plain paper only.

Select other copy modes as required.

4 Press the START key.

3-2 SETTING OF BASIC COPY MODES