Toshiba e-STUDIO211c/311c manual Simple Troubleshooting, Copier does not start

2. SIMPLE TROUBLESHOOTING

Check the following items, and if the problem still occurs, call service for assistance.

Copier does not start

Items to be checked	Countermeasure	Reference page
Is the power cord plug firmly in-	Insert the power cord plug firmly.
serted in the outlet?
Are the front covers(left and	Close the covers properly.	Page 1-2, 9-4
right), the exit cover and the
large-capacity feeder (optional)
firmly closed?
Is the bypass guide firmly	Close the bypass guide unit properly.	Page 9-13
closed?

Display does not change when keys or icons are pressed

	Is the copier in the energy saving	Press the	ENERGY SAVER or	START	Page 1-4, 6-33
	mode (Automatic Energy Saving	key on the control panel to clear the mode. (It
	mode)?	takes a while for the copier to become ready.)
	Is the access code keyed in? Is	Key in the correct access code.			Page 1-9
	the access code correct?	* If the access code is not clear, ask your copier
		manager.
	Is a key copy counter (optional)	If you are using a key copy counter, insert it			Page 1-10
	used?	into the slot.
	Is the “Warming up” message	Wait until the copier becomes ready.			Page 1-8
	displayed?
	Does the administrator password	The administrator password is required. Ask			Page 6-23
10	input screen appear?	your copier manager.
	Is interrupt copying set?	Press the	INTERRUPT key on the control		Page 2-17

panel to clear the mode.

10-4MAINTENANCE